Schatz Bearing Corporation - A Leading Provider of High-Quality Ball Bearings and Motion Control Products
P Series Pulley Bearing

P Series

Pulley Type

  • Manufactured to AS21443 per MIL-P-7034 pulleys.
  • All external surfaces except bore and stainless steel seal retainers are cadmium plated.
  • Installed with Teflon seals.
  • Pre-lubricated.
  • Retainer type.
(Click on Part Number to get 2D/3D CAD files from VirtualCAD)
Part Number Bore
(in.)		 Outside Diameter
(in.)		 Inner Ring Width
(in.)		 Outer Ring Width
(in.)		 Inner Land Diameter
(in.)		 Inner Ring Chamfer
(in.)		 Outer Ring Chamfer
(in.)		 Radial Limit Load Rating
(lbs.)		 Thrust Limit Load Rating
(lbs.)
KP3K 0.1900 0.7774 0.297 0.270 0.332 0.005 0.024 1090 600
KP3AK 0.1900 0.6250 0.297 0.234 0.297 0.005 0.016 705 385
KP3AK 0.1900 0.6250 0.625 0.234 0.297 0.005 0.016 705 385
W4AK 0.2500 0.7500 0.438 0.312 0.372 0.005 0.016 1090 600
KP4K 0.2500 0.9014 0.484 0.335 0.390 0.005 0.034 1710 800
P4K 0.2500 0.8750 0.438 0.375 0.423 0.005 0.022 1710 800
P5K 0.3125 0.8750 0.625 0.375 0.455 0.005 0.022 1710 800
PD5K 0.3125 0.9375 0.625 0.563 0.455 0.005 0.022 3420 1030
P8 0.5000 1.6875 0.750 0.563 0.768 0.005 0.032 11800 5200
P10K 0.6250 1.1875 0.438 0.375 0.769 0.005 0.022 2440 1100

 

< Previous | Next >

Schatz Bearing Corporation
10 Fairview Avenue | Poughkeepsie, NY 12601
Phone: (845) 452-6000 Fax: (845) 452-1660
Contact Us

QUALITY SYSTEM IS AS9100 CERTIFIED
Going Green - see how we have upgraded our facility!